12V/24V Relay Bypass Test Kit
DESCRIPTION
The perfect electrical circuit test assistant! Get the job done with ease!
RelaySim Pro is a handy tool that allows easy access to test automotive electrical circuit through a relay socket and fuse. Eliminates relay control circuits and provides manual control of the relay circuit.
It is compatible with standard 4 and 5 terminal relay circuits and can be used with most car makes and models. The RelaySim Pro can energize any relay that powers DC electric motors (fuel pumps, cooling fans, blower motors, window motors, and any other motor actuated by a relay), headlights, and other car lighting applications or almost all electrical actuators, such as electromagnetic, electromechanical, and electrohydraulic. Additionally, it can be used in series (in place of a fuse) with most other circuits rated for 25A or less. The device is suitable for both 12-volt and 24-volt systems and does not limit the operating current range. The operating range for continuous usage is up to 21 amps. The device supports a maximum surge of 27 amps, regardless of whether the voltage is 12V or 24V. Two LEDs (85 and 86 terminals) indicate voltage, polarity, and continuity in the relay coil circuit.
RelaySim Pro has a built-in dual high-definition LCD digital display that allows you to observe the current and voltage values in the circuit under test. The device measures the current flowing through the 87 or 87a circuit, depending on which one is currently activated. Also, it measures and displays voltage for circuits 85, 86, 87, 87a, and 30. You can directly observe the amperage and voltage going into an activated circuit, allowing you to assess the load's health. If an actuator is drawing more current than specified, or the current load is inconsistent during operation, the load/actuator is suspect and should be replaced.
RelaySim Pro, manufactured by DITEX, provides a wide range of embedded protective functions to protect the tool and the relay circuits under test.
Features
- Fits for 12V and 24V applications;
- Separate control of the 87 and 87a relay circuit;
- Integrated a dual high-definition LCD digital display;
- Built-in DC ampere meter 0...50A;
- Operating range: up to 21 amp continuous (for both 12V and 24V applications);
- Operating range: max 27 amp surge (12V or 24V);
- Measurement of the current through the activated circuit;
- Built-in DC voltage meter 0...199.9V;
- Independent voltage measurement on each relay terminal;
- Open load detection in OFF-state;
- Flags a fail event (Status LED);
- Negative voltage clamped at output with inductive loads.
APPLICATIONS
- Can be used in place of a relay and manually activate the circuit
- Can be used in place of a fuse and manually activate the circuit
- Universal cable extends the applications with non-standard or custom relay types or fuses
- Power up DC motors, fuel pumps, fan motors with just a flick of a switch.
- Allows you to check every relay terminal. Just unplug the relay and you can manually energize the relay circuit and measure voltage, current, all at the same time
- RelaySim Pro can activate 87 and 87a relay's circuits independently.
- Gives you possibility to check of the control side of the relay circuit too by a led indicator.
SPECIFICATIONS
|
Power supply operation range |
10 to 30V DC from car battery |
|
Output channels |
2 (independent) |
|
Number of simultaneously activated outputs |
1 (87 or 87a) |
|
Output supply current nominal (surge) |
21A (27A) each channel |
|
Output short circuit current limitation |
65 ampere each channel |
|
Relay coil terminals 85/86 polarity status |
Green and Red LEDs |
|
Main display |
Dual Voltage/Current digital LCD |
|
Built-in voltage meter measurement range |
0-199.9V DC |
|
Built-in current meter measurement range |
0-50A DC |
|
Embedded protective functions |
• Short circuit protection • Current limitation • Overload protection • Thermal Shutdown • Overvoltage protection • Reverse battery protection • Loss of GND and loss of positive • Electrostatic discharge protection |
|
Built-in fault indicator |
Red LED indicates fault for each channel |
|
Dimensions – main device RelaySim Pro |
170 x 83 x 36 mm |
|
Dimensions – hard plastic case |
280 x 230 x 80 mm |
|
Weight – main device RelaySim Pro |
0.4 kg |
|
Weight – complete set |
1.5 kg |
IN THE SET
- RelaySim Pro unit
- 4mm Black Banana Plug to Black Alligator Clip Test Lead Wire Cable – 0.8 Meter
- 4-pin cable ISO Micro
- 4-pin cable ISO Micro 280
- 4-pin cable ISO Mini
- 5-pin cable ISO Micro
- 5-pin cable ISO Micro 280
- 5-pin cable ISO Mini
- 5-pin cable Universal
- Hard Plastic Case
- 1-year Warranty